Skip to main content

You are here

daisy chain isp devices on same port?

2 posts / 0 new
Last post
mherron
daisy chain isp devices on same port?

How would I daisy chain a pressure plug and a memory plug on the same port on a Jeenode USB? I am using a graphics display on two other ports and an analog line on the 4th port.

Also, Is there an unused analog line available on the two ports used to drive the graphics display? Thanks, Matt

martynj

@mherron, the graphics display card consumes all of P1 & P4, but passes through connections to P2 and P3. That leaves 4 general I/O pins accessible. You can daisy chain the pressure plug and Memory plug from, for example, P2 (use P5/P6) leaving two I/O pins on P7/P8.

Does that meet your requirements? You mention one analog pin to use.

Premium Drupal Themes by Adaptivethemes